Removing an oil tank can be confusing, especially if it’s your first time. You must understand what is involved and how to get the job done.
A few different processes are involved in oil tank removal, each with costs and environmental issues. Read on to learn more.
Cutting the Tank
During the oil tank removal Westchester County NY an entryway must be cut into the tank for the cleaning. To finish this, a lot of time and work is required.
Fortunately, an innovative safe-cut tool allows for cutting steel bottoms of underground oil storage tanks without exposing personnel to toxic fumes. With safe-cut, tank-cutting is much safer and requires less labor than traditional methods.
The only factors affecting the oil tank removal price are its size and location. It also varies by the removal method (i.e., buried or aboveground).
The base price for tank removal typically includes the excavation equipment and labor to dig up and remove the tank from the ground. Additional costs include permit fees, liquid disposal charges, and laboratory analysis of the soil samples taken after the tank has been cleaned and removed.
Excavation
The excavation process is a critical part of any construction project. It is because it involves removing soil and rock to create a foundation for the structure to be built.
The first step in the excavation process is determining the excavation area. It will allow the company to plan the excavation and determine what equipment they need to use.
Once the location has been determined, a contractor will be hired to perform the excavation. This stage is essential because it ensures the work is done appropriately and safely.
The excavation process typically requires a backhoe, loader, or dozer to remove the soil from the site. The operator must also take precautions to avoid dust and noise pollution.
Sucking Out the Oil
Oil can be removed most effectively by sucking it out with a vacuum pump. It is especially true of heavy equipment such as a diesel truck or a big rig, and it’s a much more efficient way to clean out your home oil tank.
To suction out the oil, you’ll need an air compressor with an inlet opening on the side that’s large enough to fit a suction tube. Then you’ll insert that suction tube into your tank and connect it to the vacuum pump.
It is a great way to extract a small amount of oil, and it’s also a lot easier than changing the engine’s oil with a plug. However, it does leave a little bit of leftover oil in the tank, and you may need to use the same type of suction pipe to remove it.
Cleanup
If you are selling your home, you should have any underground oil tanks removed. That’s because an oil tank can leak and contaminate your property.
It also can contaminate your neighbors’ properties and your drinking water. And it can cost you a lot of money to remove and clean up a tank, which is why real estate agents and lawyers often advise buyers to have their homes swept for underground oil tanks.
The cleanup process for an oil tank usually involves sampling soil and groundwater. That’s to determine if your property is contaminated and the source of the contamination.